Description
| Machine | |
|---|---|
| Year | 2006 |
| Power | DC Battery with charger |
| Colour | Grey / Blue |
| Maximum reach | 11 meters |
| Maximum weight | 227kg |
2006 Genie Z 30-20 N
£17,000.00
Call: 0117 967 0811 | Email: info@davisaccess.co.uk
Call: 0117 967 0811 | Email: info@davisaccess.co.uk
£17,000.00
| Machine | |
|---|---|
| Year | 2006 |
| Power | DC Battery with charger |
| Colour | Grey / Blue |
| Maximum reach | 11 meters |
| Maximum weight | 227kg |
Anti-Slip Self Adhesive Safety Grip Tapes can be applied onto most surfaces and will instantly provide high quality, anti slip protection that meets safety requirements.
Suitable for use indoors or outside, this tape has a pressure sensitive permanent adhesive coating and resin bonded oxide grit applied to a durable and long lasting flexible backing.
We offer these in 4inch or 6inch width by 18M rolls
Package Included:
There are three modes to choose from, Maximum, Average and Current wind speed
Features include:
Specification:
Air Velocity:
Eco Lift Outrigger Pad with Recess
Features include:
| Size | |
|---|---|
| Dimensions (mm) | 400 x 400 x 40 |
| Recess Size (mm) | 300 x 10 |
| Load Capacity (tonnes) | 12.00 |
| Weight (kgs) | 6.00 |
Eco Lift Outrigger Pad with Recess
Features include:
| Size | |
|---|---|
| Dimensions (mm) | 400 x 400 x 50 |
| Recess Size (mm) | 300 x 10 |
| Load Capacity (tonnes) | 14.00 |
| Weight (kgs) | 7.70 |
110V Yellow Extension Lead 16A x 10M – Extension lead that are primarily designed for powering any 110V 16A application, including but not limited to, 110V power tools, small generators plus other site applications.
All extension leads are fully assembled prior to dispatch and the 16A leads are made from 1.5mm x 3 Core Yellow Arctic Flex Cable and a 110V 16A 3 pin plug & socket.
DEFENDER POWER POD TRANSFORMER 3.3KVA 2x16A OUTLETS
High tech site power transformer 110V to convert 240V to 110V – for use with 110V appliances.
• Tough rubberised DuPont casing protects against the rigours of site use and transportation
• Recessed outlets prevent them from being sheared off in harsh environments
• Power-on indicators for each socket show when tools are powered up
• Weight – 18Kg
This restraint rope lanyard has sewn end terminations complete with plastic thimble eyes. This lanyard is ideal for workers who need to be prevented from reaching a fall hazard. This lanyard must only be used in situations where there is no possibility of the worker falling.
Product Dimensions
Rope type: Kermantle
Rope diameter: 10.5mm
Maximum user weight: 100kg
M.B.S 22kn
Conforms to EN354& EN358 CE standards.
Made in the EU
Includes
x1 GFAZ011 Screw Lock Karabiner
x1 GFAZ022 Steel Scaffold Hooks
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
This twin tail shock absorbing rope lanyard has sewn end terminations complete with plastic thimble eyes. It is ideal for maintaining a point of contact during the transition between anchor points. This lanyard is complete with an energy absorbing element meaning it can be used in fall arrest situations.
Product Dimensions
Rope type: Kermantle
Rope diameter: 10.5mm
Maximum user weight: 100kg
Rope length: 1.75mtr
Conforms to EN355.2002 CE standards.
Made in the EU
Includes
Compact Shock Absorber
x1 Screw Lock Karabiner
x2 Steel Scaffold Hooks
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
This twin tail shock absorbing rope lanyard has sewn end terminations complete with plastic thimble eyes. It is ideal for maintaining a point of contact during the transition between anchor points. This lanyard is complete with an energy absorbing element meaning it can be used in fall arrest situations.
Product Dimensions
Rope type: Kermantle
Rope diameter: 10.5mm
Maximum user weight: 100kg
Rope length: 2mtr
Conforms to EN355.2002 CE standards.
Made in the EU
Includes
Compact Shock Absorber
x3 Screw Lock Karabiner
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
This shock absorbing rope lanyard has sewn end terminations complete with plastic thimble eyes. This lanyard is complete with an energy absorbing element meaning it can be used in fall arrest situations.
Product Dimensions
Rope type: Kermantle
Rope diameter: 10.5mm
Maximum user weight: 100kg
Conforms to EN355.2002 CE standards.
Made in the EU
Includes
Compact Shock Absorber
x2 Screw Lock Karabiner
Available in 1.3M or 2M lengths
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
This shock absorbing rope lanyard has sewn end terminations complete with plastic thimble eyes. This lanyard is complete with an energy absorbing element meaning it can be used in fall arrest situations.
Product Dimensions
Rope type: Kermantle
Rope length: 1.75mtr
Rope diameter: 10.5mm
Maximum user weight: 100kg
Conforms to EN355.2002 CE standards.
Made in the EU
Includes
Compact Shock Absorber
x1 Screw Lock Karabiner
x1 Steel Scaffold Hook
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
Towertag is designed to monitor the movement, build and inspection of a Tower at the point of use. Easily identify the user and/or the contractor responsible for the tower. Make information regarding the mobile towers build easily available. Record up to 8 Mobile Tower movements and up to 10 records of inspections.
The Towertag system uses our unique holder and insert system to ensure the latest status is instantly visible at the point of use.
Towertag is specifically designed to show locations & move references.
Helps you to comply with legislative requirements and good practices of:
Comes with 10 Scafftag Holders, 20 Scafftag Inserts, 1 Pen
Visual Tagging System for scaffolding to help prevent working at height hazards and manage scaffolding inspection procedures. A Scafftag should be fitted at all access points (normally ladder access) from first build stage and remain on the structure until dismantle. Record all important details relating to the scaffold class, contact details etc. Record the signature, time and date of up to 12 inspections per insert.
The world leading scaffold status tagging system to help prevent working at height hazards and efficiently manage inspection procedures.
A Scafftag should be fitted at all legal access points (normally ladder access) from first build stage and remain on the structure until dismantle. It can be attached via the porthole, locked in via a scaffold clip or secured with a pull tie.
Helps you to comply with legislative requirements and good practices of:
Comes with 10 Scafftag Holders, 20 Scafftag Inserts, 1 Pen
Towertag is designed to monitor the movement, build and inspection of a Tower at the point of use. Easily identify the user and/or the contractor responsible for the tower. Make information regarding the mobile towers build easily available. Record up to 8 Mobile Tower movements and up to 10 records of inspections.
The Towertag insert is designed to ensure the latest status is instantly visible at the point of use with locations & move references.
Designed to operate alongside Towertag holder.
Available in packs of 10, 20 , 50
Visual Tagging System for scaffolding to help prevent working at height hazards and manage scaffolding inspection procedures. A Scafftag should be fitted at all access points (normally ladder access) from first build stage and remain on the structure until dismantle. Record all important details relating to the scaffold class, contact details etc. Record the signature, time and date of up to 12 inspections per insert.
Standard Scafftag® MK1 inserts to help prevent working at height hazards and efficiently manage inspection procedures.
Designed to operate alongside Scafftag holder.
Available in packs of 10,50 or 100
Laddertag in line with BS EN 131 identifies Professional or Non-professional ladder types, unique ID number and risk assesment period (not to exceed 12 months). Pre-use and In-use checks on the reverse for ease of reference. Record unique ladder reference number, intended ladder use, risk assessment period and up to 12 ladder inspection due dates.
Updated to the new BS EN 131 norm.
Designed to operate alongside Laddertag holder.
Ladder tag inserts communicate:
Available in packs of 10, 50 , 100
Part of the JSP PressToCheck range, these ABEK1P3 combination filters are for use with the JSP Force 8 half-face mask. They offer respiratory protection against organic and inorganic vapours, acid gases and ammonia, plus very fine dusts, fumes and oil- and water-based mists. They also offer the wearer the ability to instantly check the fit and seal of their facepiece on every use.
Learn more
Part of the JSP PressToCheck range, these A2P3 combination filters are for use with the JSP Force 8 half-face mask. They offer respiratory protection against organic vapours, plus very fine dusts, fumes and oil- and water-based mists. They also offer the wearer the ability to instantly check the fit and seal of their facepiece on every use.
Learn more
Part of the JSP PressToCheck range, these P3 particulate filters are for use with the JSP Force 8 half-face mask. They offer respiratory protection against very fine dusts, and oil- and water-based mists, and offer the wearer the ability to instantly check the fit and seal of their facepiece on every use.
Learn more
Low breathing resistance is a key feature of the JSP Force 8 half-face respirator mask with its innovative PressToCheck filters and Typhoon valve.
Made with durable thermoplastic rubber and featuring an adjustable four-point suspension harness, the mask fits most faces snugly with the PressToCheck system allowing the user to verify the seal with every use.
While this mask is supplied with ABEK1P3 combination filters, it’s compatible with the full range of Force 8 filters so you can select the ones relevant to your application.
Learn more
Low breathing resistance is a key feature of the JSP Force 8 half-face respirator mask with its innovative PressToCheck A2P3 filters and Typhoon valve.
Made with durable thermoplastic rubber and featuring an adjustable four-point suspension harness, the mask fits most faces snugly with the PressToCheck system allowing the user to verify the seal with every use.
While this mask is supplied with A2P3 combination filters, it’s compatible with the full range of Force 8 filters so you can select the ones relevant to your application.
Learn more
Offers superior low breathing resistance. Accepts low profile Force8™ filters. Provides filtering protection against particulates, many gases and vapours. Conforms to EN140 (Face piece), EN14387:2004 and EN143:200 (Filter performance)
Force8 half mask with ‘PressToCheck’ filters from JSP. The Force8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and a 4 point suspension harness with quick release buckles. The mask is made with a durable thermoplastic rubber offering a superior comfort fit to most face shapes. The mask accepts the full range of low profile Force8 filters giving the Force8 the flexibility to be used for many applications, providing filtering protection against particulates, many gases and vapours. With the Force8 PressToCheck filters you can instantly check that you have the correct seal every time. Fit it. Press it. Check it.
Learn more
The low breathing resistance is a key feature of the JSP Force 8 half-face respirator mask with its innovative PressToCheck P3 filters and Typhoon valve.
Made with durable thermoplastic rubber and featuring an adjustable four-point suspension harness, the mask fits most faces snugly with the PressToCheck system allowing the user to verify the seal with every use.
While this mask is supplied with P3 particulate filters, it’s compatible with the full range of Force 8 filters so you can select the ones relevant to your application.
Learn more
Designed as a cost-effective starter kit, this Sundström SR 100 respirator kit contains a reusable half-face mask and filter accessories for respiratory protection against organic and inorganic vapours, acid gases, ammonia and particulates. Thanks to its handy storage box, it’s designed to be kept in a convenient place, such as a van or locker, so it’s on hand when needed.
Learn More
Contents Included
1 x SR 100 silicone half mask
1 x SR 510 P3 R particulate filter
1 x SR 297 ABEK1 gas filter
5 x SR 221 pre-filter
1 x Pre-filter holder
1 x Cleaning wipe
Designed as a cost-effective starter kit, this Sundström SR 100 respirator kit contains a reusable half-face mask and filter accessories for respiratory protection against organic gases and particulates. Thanks to its handy storage box, it’s designed to be kept in a convenient place, such as a van or locker, so it’s on hand when needed.
Learn More
Contents Included
1 x SR 100 silicone half mask
1 x SR 510 P3 R particulate filter
1 x SR 217 gas filter
5 x SR 221 pre-filter
1 x Pre-filter holder
1 x Cleaning wipe
Designed as a cost-effective starter kit, this Sundström SR 900 respirator kit contains a reusable half-face mask and filter accessories for respiratory protection against very small particles. Thanks to its handy storage box, it’s designed to be kept in a convenient place, such as a van or locker, so it’s on hand when needed. With its superior face seal and lightweight material, this half-face respirator mask provides a great fit and excellent working comfort.
Learn More
Contents Included
1 x SR 900 half mask
1 x SR 510 P3 R particulate filter
5 x SR 221 pre-filter
1 x Pre-filter holder
1 x Instruction manual
1 x Cleaning wipe
Available in M only
Providing a cost-effective and efficient alternative to disposable masks, this Sundström SR 100 pandemic flu kit contains a reusable half-face respirator mask and filter accessories for respiratory protection against very small particles. Thanks to its handy storage box, it’s designed to be kept in a convenient place for use when there is a risk of the spread of bacteria and viruses during a pandemic. With its superior face seal, the half-face mask provides a much tighter barrier than a disposable respirator and due to its reusable nature, it can be much more cost-effective and more environmentally friendly than using around four disposable masks each day.
Learn More
Contents Included
1 x SR 100 silicon half mask
1 x SR 510 P3 R particulate filter
5 x SR 221 pre-filter
1 x Pre-filter holder
1 x Instruction manual
1 x ID tag
Available in S/M or M/L
New Model with Ampoules – [MO-0103] – (LP)
There are two main reasons for doing Bitrex testing. Firstly to make sure that the respirator itself is suited to the wearers particular face shape. Secondly to make sure that the respirator is fitted correctly to get a tight seal and ensure safety against hazards in the workplace.
Product Features
Provides continuous point of contact along the full length of the ladder.
Ideal for maintaining 3 points of contact when a hand is needed to carry small tools or equipment.
Perfect for work such as cavity wall insulation, cable clipping, security equipment installation and maintenance, pest control, telecoms, painting/decorating and window cleaning.
The Level 2 Ladder Safety Kit comprises of:-
This ladder safety kit provides access to the top of the ladder and third point of contact to enable the worker to use both hands to complete their task when they reach their point of work
Perfect for work such as cavity wall insulation, cable clipping, security equipment installation and maintenance,
pest control and telecoms.
G-Force 2-point Harness Restraint kit.
A cost effective Restraint Kit that’s ideal for use with access equipment consisting of,
1x 2mtr Adjustable Restraint Lanyard EN354 EN358 CE
Includes
Product Dimensions
Drawstring Storage Kit Bag
Drawstring kit bag, perfect for storing fall protection products.
Made from Polyester/Nylon fabric
| Size | Height | Chest | Waist |
|---|---|---|---|
| M – XL | 170 – 185cm | 90 – 120cm | 85 – 120cm |
| XXL | 180 – 195cm | 100 – 130cm | 100 – 140cm |
*This lanyard must only be used in situations where there is no possibility of the worker falling.
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
Y-Shaped Lanyard with Scaffold Hooks
This twin-tail restraint rope lanyard has sewn end terminations complete with plastic thimble eyes.
The large scaffold hook is attached to the tail end.
Available in three different lengths: 1M, 1.5M and 2M.
Product Dimensions:
The Y-shaped lanyard comes with:
*This lanyard must only be used in situations where there is no possibility of the worker falling.
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
‘Y’ Restraint Rope Lanyard
This twin tail restraint rope lanyard has sewn end terminations complete with plastic thimble eyes. It is ideal for maintaining a point of contact during the transition between anchor points.
Available to be purchased in 1M, 1.5M & 2M lengths.
Product Dimensions
The Y-shaped lanyard comes with:
*This lanyard must only be used in situations where there is no possibility of the worker falling.
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
This adjustable lanyard is made from polyamide kermantle rope, one end is complete with a plastic thimble eye. The other is complete with the adjusting buckle which allows the user to change the length of the lanyard.
This lanyard is ideal for workers who need to be prevented from reaching a fall hazard.
Available to be purchased in 1M, 1.6M & 2M lengths.
Product Dimensions
Includes
x2 Screw Lock Karabiner
Measurements range from the following:
*This lanyard must only be used in situations where there is no possibility of the worker falling.
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
This adjustable lanyard is made from polyamide kermantle rope, one end is complete with a plastic thimble eye. The other is complete with the adjusting buckle which allows the user to change the length of the lanyard.
This lanyard is ideal for workers who need to be prevented from reaching a fall hazard.
Available to be purchased in 1M, 1.6M & 2M lengths.
Product Dimensions
Rope type: Kermantle
Rope diameter: 12mm
Maximum user weight: 100kg
Conforms to EN354 CE standards.
Includes
x2 Screw Lock Karabiner
Measurements range from the following:
2mtr is adjustable from 2m to 1.3m including 2 x AZ011 karabiners
1.6mtr is adjustable from 1.6mtr to 1.2mtr including 2 x AZ011 karabiners
1mtr is adjustable 1.2m to 0.85m including 2 x AZ011 karabiners
*This lanyard must only be used in situations where there is no possibility of the worker falling.
*Please note that this product can have a maximum lifespan of 10 years from the date of manufacture. This is irrespective of shelf life/working life. This is subject to correct usage, storage and thorough examination by a competent person. The date of manufacture can be found on the ID label which is sewn onto this product.
The SpanSet X Harness range has been the benchmark for user comfort and functionality for many years.
The high grade of material used ensures the product is easy to handle and fit throughout its’ entire service life.
The three point fit system of adjustment ensures whatever shape or size you are the harness can accommodate your torso securely for maximum comfort and protection in the event of a fall.
The X Harness range includes several application specific models providing the functionality and features you need for your work environment.
P32 pro 2 – point safety harness
Pro safety harness features,
| Size | Height | Chest | Waist |
|---|---|---|---|
| S | 80 – 100cm | 75 – 110cm | |
| M – XL | 170 – 185cm | 90 – 120cm | 85 – 120cm |
| XXL | 110 – 130cm | 100 – 140cm |
Working at Height Kit ideal for scaffolders featuring,
*Full Safety Harness with 2 Anchor points to the chest, rear dorsal and a rescue loop to recover the user in the event of a fall.
Model G-Force P10R Rescue Harness.
1x 1.75mtr Shock Absorber Kermatle Rope Lanyard
1x Screw gate karabiner conforms to EN362 Standard
1x Scaffold hook [ opening 55mm ].
1x Draw string storage kit bag
| Size | Height | Chest | Waist |
|---|---|---|---|
| M – XL | 170 – 185cm | 90 – 120cm | 85 – 120cm |
Premium Scaffolders Height Safety Kit consists of the following accessories: 1 x Multi Purpose Safety Harness, Elasticated Shock Absorber lanyard with scaffold hook, and Zip Up Back Pack
Product Features
Elasticated Shock Absorber lanyard with scaffold hook
The elasticated webbing keeps the lanyard compact when it is not fully extended, reducing the risks of tangling.
Product Information
Webbing Width: 32mm
Length: 1.75 mtr
Conforms to EN355.2002 standards.
x1 Scaffold Hook
x1 Screw Lock Karabiner
Conforms to EN355.2002 standards.
Zip Up Back Pack
Black polyester fabric zip up back pack perfect for storing all of your fall protection products.
Features
x2 adjustable shoulder straps and reinforced top carry handle
Webbing Width: 32mm
Length: 1.75 mtr
Conforms to EN355.2002 standards.
